Bacteriostatic water, sterile water, and the 0.9 per cent that makes the difference

The diluent question is asked constantly and answered badly. Water for injection contains nothing but water and supports microbial growth as readily as any other nutrient-poor aqueous medium. Bacteriostatic water contains benzyl alcohol at nine parts per thousand, which inhibits the growth of contaminating organisms and is the reason multiple-dose presentations exist at all. Two things follow that are routinely missed: a preservative inhibits growth rather than eliminating existing contamination, and benzyl alcohol is not inert towards every peptide, having been implicated in aggregation of certain protein formulations.

Deamidation, and the isomer with the same mass

Deamidation of asparagine proceeds through nucleophilic attack by the backbone nitrogen of the following residue on the asparagine side-chain carbonyl, forming a five-membered succinimide intermediate which then hydrolyses to a mixture of aspartate and isoaspartate, conventionally in a ratio favouring the isomer roughly three to one. Glutamine deamidates by an analogous route, far more slowly, through a six-membered intermediate.

Three factors govern the rate. Sequence is dominant: the residue immediately following the asparagine determines how readily the intermediate forms, and asparagine-glycine is the fastest motif known, with serine, histidine and alanine following. Solution pH matters, with the rate minimal in the mildly acidic region and rising steeply above neutrality as the backbone nitrogen becomes more nucleophilic. Temperature and water activity set the overall pace, which is why the solid state helps so much.

The analytical problem is that isoaspartate has the same elemental composition and therefore the same molecular mass as the parent. Identity confirmation by molecular ion alone cannot distinguish them, and a preparation that is substantially deamidated will present as the intended compound. The isomers usually separate on a sufficiently shallow reversed-phase gradient, and specific methods exist, but only a method designed for the question will find the answer.¹

In-use stability, and where the numbers come from

In-use stability is established by a dedicated study: the finished product reconstituted as intended, at the intended concentration, in the intended container, stored at the intended temperature, sampled at intervals, and analysed by stability-indicating methods for related substances and by a size-based method for aggregates. The output is a period, and the period belongs to that formulation in that container and to nothing else.

The in-use periods circulating in this market are not derived that way. They are, in the Journal’s experience of tracing them, borrowed from the labelling of marketed pen presentations, which are different formulations at different concentrations with different preservative systems in different primary containers. Marketed in-use periods for the incretin pens run from four weeks to eight depending on product and storage condition, and none of those figures transfers to a reconstituted research vial by any argument we can construct.

What can be said generally is directional rather than numerical. Degradation in solution proceeds orders of magnitude faster than in the cake. Lower temperature helps substantially. Repeated warming and cooling of an opened vial is worse than steady storage. Preservative-containing diluent addresses microbial growth and does nothing about chemical degradation. And in the absence of a study on the actual product, any specific number quoted for an in-use period is an assumption wearing a specification’s clothes.

One further loss is routinely mistaken for degradation. Peptides adsorb to glass and polymer surfaces, and the relationship runs the awkward way: the more dilute the solution, the larger the proportion a given surface area removes.²

Phase-change packs hold a narrower band for longer than water ice and avoid the sub-zero shock a freshly frozen gel pack delivers to a vial in direct contact. They cost a little more, and several suppliers switched to them after readers of this department asked.

Bacteriostatic water, sterile water, and what each is for

Sterile water for injection contains water and nothing else. It is sterile when the container is opened and it has no capacity to remain so, and it supports the growth of any organism introduced subsequently. It is the appropriate diluent for a single-use presentation and the wrong one for anything intended to be entered more than once.

Bacteriostatic water for injection contains benzyl alcohol at nine parts per thousand. Benzyl alcohol inhibits microbial growth, which is what makes a multiple-dose presentation coherent, and it is important to be exact about what that means: a preservative suppresses the proliferation of organisms introduced during use. It does not sterilise a contaminated solution, it does not act instantly, and its effectiveness against a given organism is established by a specific compendial test rather than assumed.

Two further points get lost. Benzyl alcohol is not universally compatible; it has been implicated in the aggregation of certain protein formulations, and compatibility with a given peptide is a question for data rather than for convention. And a preservative system has its own stability: preservative content declines over an in-use period, which is one of the attributes a proper in-use study measures. A diluent choice is therefore a formulation decision with chemical consequences, not a matter of preference between two clear liquids.³

Freezing a solution is not storing it

Freezing a reconstituted vial to extend its life is a common inference and a poor one, for reasons that have nothing to do with temperature and everything to do with what happens during the phase change. As ice forms, solutes are excluded from the crystal lattice and concentrated into a shrinking unfrozen fraction. Local concentration, ionic strength and pH in that fraction can shift dramatically — buffer components crystallise at different points, and a phosphate buffer is notorious for a large pH excursion on freezing.

The ice-water interface is itself a denaturing surface, and interfacial area increases with the number of freeze-thaw cycles. Each cycle presents the peptide with a fresh opportunity to unfold at that interface and aggregate. This is why formulations intended for frozen storage contain cryoprotectants and why lyophilisation exists as a technique at all: the point of drying is to avoid keeping a peptide in a partially frozen aqueous system.

The Journal states the mechanism and declines the recommendation, as this department’s practice requires. What can be said without advising anybody is that freezing a reconstituted solution is a different chemical operation from freezing a dried cake, that its effects are formulation-dependent and not predictable from first principles, and that no in-use study we have seen in this market has examined it. A reader treating the freezer as a pause button is relying on an assumption nobody has tested for that product.

Adsorption to the container looks exactly like degradation and is not. At low working concentrations a real fraction of peptide can be lost to glass or plastic within hours, which is why a dilute solution behaves worse than a concentrated one prepared the same day.

A note on method and sourcing

The regulatory framework in this article is taken from the harmonised guidelines on stability testing and on biotechnological products, read in the original, and from the current compendial chapters on storage definitions, distribution of temperature-sensitive products and stability in dispensing practice. The degradation chemistry is drawn from the peptide and pharmaceutical sciences literature, and where a claim is a generalisation across sequences this piece says so, because sequence dependence is the rule rather than the exception.

The shipment data is ours. Nine parcels, ordered at catalogue prices as ordinary customers, with calibrated loggers placed inside the insulated payload and sampling at five-minute intervals. Eight complete traces and one truncated by a customs hold. We disclose that nine parcels is not a survey, that we did not control the packing operation, and that a single logger cannot characterise a payload with a thermal gradient across it.

Nothing in this department is a recommendation about storing, reconstituting or administering anything. The compounds discussed are sold for research use only and are not approved for human use in any jurisdiction. Corrections and disputes go to standards@compoundjournal.com; documents, traces and certificates readers would like examined go to letters@compoundjournal.com, and we do not identify the source of anything sent to us.

The finding the Journal least wanted and most trusts is that the transit excursions everybody worries about are probably not the largest exposure in this supply chain. A dried cake at low moisture tolerates a warm afternoon. A reconstituted vial in a refrigerator door for six weeks, with no in-use study behind the number that justified the six weeks, is a different proposition, and it attracts almost no attention at all.